the route addition failed the parameter is incorrect

windows - The destination can be an IP network address (where the host bits of the network address are set to 0), an IP address for a host route, or 0.0.0.0 for the default route. Just got The route addition failed: The parameter is incorrect. error myself and it turns out I was using the wrong network address.

windows - Why does this ROUTE ADD command fail? - That might work because your IP would just fail routing the traffic. route ADD 199.239.136.200 MASK 255.255.255.255 <OWN_IP> METRIC

Add static route for newbie - i get error message The route addition failed. The parameter is incorrect. was also wondering if route only needs to be added on 1 server from

Route add problems - route add 192.168.1.0 mask 255.255.255.0 206.89.213.95(routers WAN ip). and the message i got was: "The route addition failed. settings it says that the mask parameter is invalid (Destination & mask != something).

Force windows to route a certain IP out the VPN interface? - I'd like to use a route add to force one IP to go through the VPN. route add 10.235 .0.10 The route addition failed: The parameter is incorrect.

Route addition problem - route add 10.88.75.32 MASK 255.255.255.255 10.16.47.101. The route addition failed: The parameter is incorrect. IPCONFIG /ALL shows the

Developers - 16 July 2013 Posted by Nami WANG. each command returns "The route addition failed: The parameter is incorrect". both occurs in Windows 7 and Windows 8.1.

Route Add Windows - A Guide to Windows Routing - DEST. Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1 The route addition failed: The specified mask parameter is invalid.

route add cmd - route add 172.17.2.50 MASK 255.255.255.0 66.196.218.149 The route addition failed: The parameter is incorrect. Any reason why. i don't really know how this

[SOLVED] Adding a route to windows I get a bad argument - Solution: Try this pleaseroute add -p 192.168.99.0 mask 255.255.255.0 192.168. 100.254.

route add interface number

ip routing - Windows: Get the interface number of a NIC - You can see that info also when you run the route print command. can (and should) just add your routes with netsh using the interface name:

How to Find a Network Interface Index Number - Select the command prompt window, type the command "route print" and press "Enter" to display the "Interface List" and system routing tables. The interface index numbers appear under the Interface List in the left column and correspond to the physical or logical device listed in the right column.

Q. When I add a static IP route, what value do I use for the interface - Learn which value to use for the interface when adding a static IP route. mask < subnet mask> <gateway> metric <lowest number wins> if <interface>.

Add Routes in Windows Server. What is my Interface number - I need to add a routes to a Windows 2003 server. PLease guide. I do not know how to find out the Interface number. Even I am giving the correct

3 Ways to Modify Windows Route Table to Choose Which - This small and portable tool allows you to easily add, modify or delete route entries Next, type “route print” in command prompt to get the interface number and

ip - IPv4 interface number - Since when do we need to add interface when adding a route to IP table? 1) and 10.0.0.1 (IF 2). it would have route rules that would route all traffic to 10.x.y.z out interface 2, and all traffic destined for 192.x.y.z out interface 1. It is important that the interface be identified if you have more than one of them,

Route Add Windows - A Guide to Windows Routing - You can also optionally add a IF 2 to the end. This will force the route to use interface 2. You can see what interface numbers you have with the

Interface index of an adapter - Keywords: How do I find the Network Interface Index Number. . number to get and matches the Interface shown if you do a "route print" command. You can get a cross reference by adding another term to the commands listed

Interface Number - IRB provides the ability to route between a bridged domain and a routed domain with the The interface number of the BVI is the link between the BVI and the . bridge table has become full to capacity—it simply fails to add the new address.

how do I get the dynamic WAN (PPP/SLIP) Interface number in a - how do I get the dynamic WAN (PPP/SLIP) Interface number in a powesrhell I would like to use a powershell script to add a route bound to a L2TP VPN

route addition failed using service

ROUTE: route addition failed using service: The parameter is - This error seems to prevent my client from setting gateway for the adapter. I can't find any information online about what causes it or how to fix it.

#68 (Windows route add command failed) – OpenVPN Community - ROUTE: route addition failed using CreateIpForwardEntry : Access denied. OpenVPN is usually run as a service, which runs with administrator privileges.

windows - You need to define the range using network & netmask. Just got The route addition failed: The parameter is incorrect. error myself and it turns

OpenVPN for Windows to pfSense - I have the strangest issue with OpenVPN for Windows. I have a VPN that will come up, but it will not pass traffic. I am using the same

OpenVPN GUI connecting but not routing traffic out the VPN - If you are using Windows Vista/7 and receive the below errors, 99% of the time Fri Jan 07 14:26:09 2011 ROUTE: route addition failed using

OpenVPN "Connected" but not routing.. - Tue Jun 12 18:58:49 2018 ROUTE: route addition failed using service: The parameter is incorrect. [status=87 if_index=15] Tue Jun 12 18:58:49

windows - Why does this ROUTE ADD command fail? - In a comment you mentioned using your own IP address. That might work because your IP would just fail routing the traffic. I have not tested this

Vista and Win 7: OpenVPN route problem - ROUTE: route addition failed using CreateIpForwardEntry: One or more arguments are not correct. [if_index=18] Route addition via IPAPI failed.

Openvpn route addition failed using service - When trying to connect to using the Sophos Vpn (Windows) client to Sophos XG, using the protocol OpenVPN i get the following error message in de log:.

XG Firewall - When trying to connect to using the Sophos Vpn (Windows) client to Sophos XG, [status=5010 if_index=18] Route addition via service failed".