Center content of UIScrollView when smaller

I have a UIImageView inside a UIScrollView which I use for zooming and scrolling. If the image / content of the scroll view is bigger than the scroll view, everything works fine. However, when the image becomes smaller than the scroll view, it sticks to the top left corner of the scroll view. I would like to keep it centered, like the Photos app.

Any ideas or examples about keeping the content of the UIScrollView centered when it's smaller?

I am working with iPhone 3.0.

The following code almost works. The image returns to the top left corner if I pinch it after reaching the minimum zoom level.

- (void)loadView {
    [super loadView];

    // set up main scroll view
    imageScrollView = [[UIScrollView alloc] initWithFrame:[[self view] bounds]];
    [imageScrollView setBackgroundColor:[UIColor blackColor]];
    [imageScrollView setDelegate:self];
    [imageScrollView setBouncesZoom:YES];
    [[self view] addSubview:imageScrollView];

    UIImageView *imageView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"WeCanDoIt.png"]];
    [imageView setTag:ZOOM_VIEW_TAG];
    [imageScrollView setContentSize:[imageView frame].size];
    [imageScrollView addSubview:imageView];

    CGSize imageSize = imageView.image.size;
    [imageView release];

    CGSize maxSize = imageScrollView.frame.size;
    CGFloat widthRatio = maxSize.width / imageSize.width;
    CGFloat heightRatio = maxSize.height / imageSize.height;
    CGFloat initialZoom = (widthRatio > heightRatio) ? heightRatio : widthRatio;

    [imageScrollView setMinimumZoomScale:initialZoom];
    [imageScrollView setZoomScale:1];

    float topInset = (maxSize.height - imageSize.height) / 2.0;
    float sideInset = (maxSize.width - imageSize.width) / 2.0;
    if (topInset < 0.0) topInset = 0.0;
    if (sideInset < 0.0) sideInset = 0.0;
    [imageScrollView setContentInset:UIEdgeInsetsMake(topInset, sideInset, -topInset, -sideInset)];

- (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView {
    return [imageScrollView viewWithTag:ZOOM_VIEW_TAG];

/************************************** NOTE **************************************/
/* The following delegate method works around a known bug in zoomToRect:animated: */
/* In the next release after 3.0 this workaround will no longer be necessary      */
- (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale {
    [scrollView setZoomScale:scale+0.01 animated:NO];
    [scrollView setZoomScale:scale animated:NO];
    // END Bug workaround

    CGSize maxSize = imageScrollView.frame.size;
    CGSize viewSize = view.frame.size;
    float topInset = (maxSize.height - viewSize.height) / 2.0;
    float sideInset = (maxSize.width - viewSize.width) / 2.0;
    if (topInset < 0.0) topInset = 0.0;
    if (sideInset < 0.0) sideInset = 0.0;
    [imageScrollView setContentInset:UIEdgeInsetsMake(topInset, sideInset, -topInset, -sideInset)];


I've got very simple solution! All you need is to update the center of your subview (imageview) while zooming in the ScrollViewDelegate. If zoomed image is smaller than scrollview then adjust else center is (0,0).

- (void)scrollViewDidZoom:(UIScrollView *)scrollView 
    UIView *subView = [scrollView.subviews objectAtIndex:0];

    CGFloat offsetX = MAX((scrollView.bounds.size.width - scrollView.contentSize.width) * 0.5, 0.0);
    CGFloat offsetY = MAX((scrollView.bounds.size.height - scrollView.contentSize.height) * 0.5, 0.0); = CGPointMake(scrollView.contentSize.width * 0.5 + offsetX, 
                                 scrollView.contentSize.height * 0.5 + offsetY);

@EvelynCordner's answer was the one that worked best in my app. A lot less code than the other options too.

Here's the Swift version if anyone needs it:

func scrollViewDidZoom(_ scrollView: UIScrollView) {
    let offsetX = max((scrollView.bounds.width - scrollView.contentSize.width) * 0.5, 0)
    let offsetY = max((scrollView.bounds.height - scrollView.contentSize.height) * 0.5, 0)
    scrollView.contentInset = UIEdgeInsetsMake(offsetY, offsetX, 0, 0)

Okay, I've been fighting this for the past two days on and off and having finally come to a pretty reliable (so far...) solution I thought I should share it and save others some pain. :) If you do find a problem with this solution please shout!

I've basically gone through what everyone else has: searching StackOverflow, the Apple Developer Forums, looked at the code for three20, ScrollingMadness, ScrollTestSuite, etc. I've tried enlarging the UIImageView frame, playing with the UIScrollView's offset and/or insets from the ViewController, etc. but nothing worked great (as everyone else has found out too).

After sleeping on it, I tried a couple of alternative angles:

  1. Subclassing the UIImageView so it alters it's own size dynamically - this didn't work well at all.
  2. Subclassing the UIScrollView so it alters it's own contentOffset dynamically - this is the one that seems to be a winner for me.

With this subclassing UIScrollView method I'm overriding the contentOffset mutator so it isn't setting {0,0} when the image is scaled smaller than the viewport - instead it's setting the offset such that the image will be kept centred in the viewport. So far, it always seems to work. I've checked it with wide, tall, tiny & large images and doesn't have the "works but pinch at minimum zoom breaks it" issue.

I've uploaded an example project to github that uses this solution, you can find it here:

This code should work on most versions of iOS (and has been tested to work on 3.1 upwards).

It's based on the Apple WWDC code for the photoscoller.

Add the below to your subclass of UIScrollView, and replace tileContainerView with the view containing your image or tiles:

- (void)layoutSubviews {
    [super layoutSubviews];

    // center the image as it becomes smaller than the size of the screen
    CGSize boundsSize = self.bounds.size;
    CGRect frameToCenter = tileContainerView.frame;

    // center horizontally
    if (frameToCenter.size.width < boundsSize.width)
        frameToCenter.origin.x = (boundsSize.width - frameToCenter.size.width) / 2;
        frameToCenter.origin.x = 0;

    // center vertically
    if (frameToCenter.size.height < boundsSize.height)
        frameToCenter.origin.y = (boundsSize.height - frameToCenter.size.height) / 2;
        frameToCenter.origin.y = 0;

    tileContainerView.frame = frameToCenter;

For a solution better suited for scroll views that use autolayout, use content insets of the scroll view rather than updating the frames of your scroll view's subviews.

- (void)scrollViewDidZoom:(UIScrollView *)scrollView
    CGFloat offsetX = MAX((scrollView.bounds.size.width - scrollView.contentSize.width) * 0.5, 0.0);
    CGFloat offsetY = MAX((scrollView.bounds.size.height - scrollView.contentSize.height) * 0.5, 0.0);

    self.scrollView.contentInset = UIEdgeInsetsMake(offsetY, offsetX, 0.f, 0.f);

Currently I'm subclassing UIScrollView and overriding setContentOffset: to adjust the offset based on contentSize. It works both with pinch and programatic zooming.

@implementation HPCenteringScrollView

- (void)setContentOffset:(CGPoint)contentOffset
    const CGSize contentSize = self.contentSize;
    const CGSize scrollViewSize = self.bounds.size;

    if (contentSize.width < scrollViewSize.width)
        contentOffset.x = -(scrollViewSize.width - contentSize.width) / 2.0;

    if (contentSize.height < scrollViewSize.height)
        contentOffset.y = -(scrollViewSize.height - contentSize.height) / 2.0;

    [super setContentOffset:contentOffset];


In addition to being short and sweet, this code produces a much smoother zoom than @Erdemus solution. You can see it in action in the RMGallery demo.

I've spent a day fighting with this issue, and ended up implementing the scrollViewDidEndZooming:withView:atScale: as follows:

- (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale {
    CGFloat screenWidth = [[UIScreen mainScreen] bounds].size.width;
    CGFloat screenHeight = [[UIScreen mainScreen] bounds].size.height;
    CGFloat viewWidth = view.frame.size.width;
    CGFloat viewHeight = view.frame.size.height;

    CGFloat x = 0;
    CGFloat y = 0;

    if(viewWidth < screenWidth) {
        x = screenWidth / 2;
    if(viewHeight < screenHeight) {
        y = screenHeight / 2 ;

    self.scrollView.contentInset = UIEdgeInsetsMake(y, x, y, x);

This ensures that when the image is smaller than the screen, there's still adequate space around it so you can position it to the exact place you want.

(assuming that your UIScrollView contains an UIImageView to hold the image)

Essentially, what this does is check whether your image view's width / height is smaller that the screen's width / height, and if so, create an inset of half the screen's width / height (you could probably make this larger if you want the image to go out of the screen bounds).

Note that since this is a UIScrollViewDelegate method, don't forget to add it to your view controller's declaration, so to avoid getting a build issue.

Apple has released the 2010 WWDC session videos to all members of the iphone developer program. One of the topics discussed is how they created the photos app!!! They build a very similar app step by step and have made all the code available for free.

It does not use private api either. I can't put any of the code here because of the non disclosure agreement, but here is a link to the sample code download. You will probably need to login to gain access.

And, here is a link to the iTunes WWDC page:

Ok, this solution is working for me. I have a subclass of UIScrollView with a reference to the UIImageView it is displaying. Whenever the UIScrollView zooms, the contentSize property is adjusted. It is in the setter that I scale the UIImageView appropriately and also adjust its center position.

-(void) setContentSize:(CGSize) size{
CGSize lSelfSize = self.frame.size;
CGPoint mid;
if(self.zoomScale >= self.minimumZoomScale){
    CGSize lImageSize = cachedImageView.initialSize;
    float newHeight = lImageSize.height * self.zoomScale;

    if (newHeight < lSelfSize.height ) {
        newHeight = lSelfSize.height;
    size.height = newHeight;

    float newWidth = lImageSize.width * self.zoomScale;
    if (newWidth < lSelfSize.width ) {
        newWidth = lSelfSize.width;
    size.width = newWidth;
    mid = CGPointMake(size.width/2, size.height/2);

else {
    mid = CGPointMake(lSelfSize.width/2, lSelfSize.height/2);
} = mid;
[super  setContentSize:size];
[self printLocations];
NSLog(@"zoom %f setting size %f x %f",self.zoomScale,size.width,size.height);

Evertime I set the image on the UIScrollView I resize it. The UIScrollView in the scrollview is also a custom class I created.

-(void) resetSize{
    if (!scrollView){//scroll view is view containing imageview

    CGSize lSize = scrollView.frame.size;

    CGSize lSelfSize = self.image.size; 
    float lWidth = lSize.width/lSelfSize.width;
    float lHeight = lSize.height/lSelfSize.height;

    // choose minimum scale so image width fits screen
    float factor  = (lWidth<lHeight)?lWidth:lHeight;

    initialSize.height = lSelfSize.height  * factor;
    initialSize.width = lSelfSize.width  * factor;

    [scrollView setContentSize:lSize];
    [scrollView setContentOffset:CGPointZero];
    scrollView.userInteractionEnabled = YES;

With these two methods I am able to have a view that behaves just like the photos app.

You could watch the contentSize property of the UIScrollView (using key-value observing or similar), and automatically adjust the contentInset whenever the contentSize changes to be less than the size of the scroll view.

One elegant way to center the content of UISCrollView is this.

Add one observer to the contentSize of your UIScrollView, so this method will be called everytime the content change...

[myScrollView addObserver:delegate 

Now on your observer method:

- (void)observeValueForKeyPath:(NSString *)keyPath   ofObject:(id)object   change:(NSDictionary *)change   context:(void *)context { 

    // Correct Object Class.
    UIScrollView *pointer = object;

    // Calculate Center.
    CGFloat topCorrect = ([pointer bounds].size.height - [pointer viewWithTag:100].bounds.size.height * [pointer zoomScale])  / 2.0 ;
            topCorrect = ( topCorrect < 0.0 ? 0.0 : topCorrect );

    topCorrect = topCorrect - (  pointer.frame.origin.y - imageGallery.frame.origin.y );

    // Apply Correct Center. = CGPointMake(,
                        + topCorrect ); }
  • You should change the [pointer viewWithTag:100]. Replace by your content view UIView.

    • Also change imageGallery pointing to your window size.

This will correct the center of the content everytime his size change.

NOTE: The only way this content don't works very well is with standard zoom functionality of the UIScrollView.

This is my solution to that problem which works pretty fine for any kind of view inside a scrollview.

-(void)scrollViewDidZoom:(__unused UIScrollView *)scrollView 
    CGFloat top;
    CGFloat left;
    CGFloat bottom;
    CGFloat right;

    if (_scrollView.contentSize.width < scrollView.bounds.size.width) {
        DDLogInfo(@"contentSize %@",NSStringFromCGSize(_scrollView.contentSize));

        CGFloat width = (_scrollView.bounds.size.width-_scrollView.contentSize.width)/2.0;

        left = width;
        right = width;

    }else {
        left = kInset;
        right = kInset;

    if (_scrollView.contentSize.height < scrollView.bounds.size.height) {

        CGFloat height = (_scrollView.bounds.size.height-_scrollView.contentSize.height)/2.0;

        top = height;
        bottom = height;

    }else {
        top = kInset;
        right = kInset;

    _scrollView.contentInset = UIEdgeInsetsMake(top, left, bottom, right);

  if ([self.tiledScrollViewDelegate respondsToSelector:@selector(tiledScrollViewDidZoom:)])
        [self.tiledScrollViewDelegate tiledScrollViewDidZoom:self];

There are a plenty of solutions here, but I'd risk putting here my own. It's good for two reasons: it doesn't mess zooming experience, as would do updating image view frame in progress, and also it respects original scroll view insets (say, defined in xib or storyboard for graceful handling of semi-transparent toolbars etc).

First, define a small helper:

CGSize CGSizeWithAspectFit(CGSize containerSize, CGSize contentSize) {
    CGFloat containerAspect = containerSize.width / containerSize.height,
            contentAspect = contentSize.width / contentSize.height;

    CGFloat scale = containerAspect > contentAspect
                    ? containerSize.height / contentSize.height
                    : containerSize.width / contentSize.width;

    return CGSizeMake(contentSize.width * scale, contentSize.height * scale);

To retain original insets, defined field:

UIEdgeInsets originalScrollViewInsets;

And somewhere in viewDidLoad fill it:

originalScrollViewInsets = self.scrollView.contentInset;

To place UIImageView into UIScrollView (assuming UIImage itself is in loadedImage var):

CGSize containerSize = self.scrollView.bounds.size;
containerSize.height -= + originalScrollViewInsets.bottom;
containerSize.width -= originalScrollViewInsets.left + originalScrollViewInsets.right;

CGSize contentSize = CGSizeWithAspectFit(containerSize, loadedImage.size);

UIImageView *imageView = [[UIImageView alloc] initWithFrame:(CGRect) { CGPointZero, contentSize }];
imageView.autoresizingMask = UIViewAutoresizingNone;
imageView.contentMode = UIViewContentModeScaleAspectFit;
imageView.image = loadedImage;

[self.scrollView addSubview:imageView];
self.scrollView.contentSize = contentSize;

[self centerImageViewInScrollView];

scrollViewDidZoom: from UIScrollViewDelegate for that scroll view:

- (void)scrollViewDidZoom:(UIScrollView *)scrollView {
    if (scrollView == self.scrollView) {
        [self centerImageViewInScrollView];

An finally, centering itself:

- (void)centerImageViewInScrollView {
    CGFloat excessiveWidth = MAX(0.0, self.scrollView.bounds.size.width - self.scrollView.contentSize.width),
            excessiveHeight = MAX(0.0, self.scrollView.bounds.size.height - self.scrollView.contentSize.height),
            insetX = excessiveWidth / 2.0,
            insetY = excessiveHeight / 2.0;

    self.scrollView.contentInset = UIEdgeInsetsMake(
            MAX(insetX, originalScrollViewInsets.left),
            MAX(insetY, originalScrollViewInsets.bottom),
            MAX(insetX, originalScrollViewInsets.right)

I didn't test orientation change yet (i.e. proper reaction for resizing UIScrollView itself), but fix for that should be relatively easy.

You'll find that the solution posted by Erdemus does work, but… There are some cases where the scrollViewDidZoom method does not get invoked & your image is stuck to the top left corner. A simple solution is to explicitly invoke the method when you initially display an image, like this:

[self scrollViewDidZoom: scrollView];

In many cases, you may be invoking this method twice, but this is a cleaner solution than some of the other answers in this topic.

Apple's Photo Scroller Example does exactly what you are looking for. Put this in your UIScrollView Subclass and change _zoomView to be your UIImageView.

  [super layoutSubviews];
  // center the zoom view as it becomes smaller than the size of the screen
  CGSize boundsSize = self.bounds.size;
  CGRect frameToCenter = self.imageView.frame;
  // center horizontally
  if (frameToCenter.size.width < boundsSize.width){
     frameToCenter.origin.x = (boundsSize.width - frameToCenter.size.width) / 2;
    frameToCenter.origin.x = 0;
  // center vertically
  if (frameToCenter.size.height < boundsSize.height){
     frameToCenter.origin.y = (boundsSize.height - frameToCenter.size.height) / 2;
    frameToCenter.origin.y = 0;
  self.imageView.frame = frameToCenter; 

Apple's Photo Scroller Sample Code

The way I've done this is to add an extra view into the hierarchy:

UIScrollView -> UIView -> UIImageView

Give your UIView the same aspect ratio as your UIScrollView, and centre your UIImageView into that.

To make the animation flow nicely, set

self.scrollview.bouncesZoom = NO;

and use this function (finding the center using the method at this answer)

- (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(CGFloat)scale {
    [UIView animateWithDuration:0.2 animations:^{
        float offsetX = MAX((scrollView.bounds.size.width-scrollView.contentSize.width)/2, 0);
        float offsetY = MAX((scrollView.bounds.size.height-scrollView.contentSize.height)/2, 0); = CGPointMake(scrollView.contentSize.width*0.5+offsetX, scrollView.contentSize.height*0.5+offsetY);

This creates the bouncing effect but doesn't involve any sudden movements beforehand.

Just the approved answer in swift, but without subclassing using the delegate

func centerScrollViewContents(scrollView: UIScrollView) {
    let contentSize = scrollView.contentSize
    let scrollViewSize = scrollView.frame.size;
    var contentOffset = scrollView.contentOffset;

    if (contentSize.width < scrollViewSize.width) {
        contentOffset.x = -(scrollViewSize.width - contentSize.width) / 2.0

    if (contentSize.height < scrollViewSize.height) {
        contentOffset.y = -(scrollViewSize.height - contentSize.height) / 2.0

    scrollView.setContentOffset(contentOffset, animated: false)

// UIScrollViewDelegate    
func scrollViewDidZoom(scrollView: UIScrollView) {

In case your inner imageView has initial specific width(eg 300) and you just want to center its width only on zoom smaller than its initial width this might help you also.

 func scrollViewDidZoom(scrollView: UIScrollView){
    if imageView.frame.size.width < 300{ = self.view.frame.width/2

Here's the current way I'm making this work. It's better but still not perfect. Try setting:

 myScrollView.bouncesZoom = YES; 

to fix the problem with the view not centering when at minZoomScale.

- (void)scrollViewDidScroll:(UIScrollView *)scrollView
CGSize screenSize = [[self view] bounds].size;//[[UIScreen mainScreen] bounds].size;//
CGSize photoSize = [yourImage size];
CGFloat topInset = (screenSize.height - photoSize.height * [myScrollView zoomScale]) / 2.0;
CGFloat sideInset = (screenSize.width - photoSize.width * [myScrollView zoomScale]) / 2.0;

if (topInset < 0.0)
{ topInset = 0.0; }
if (sideInset < 0.0)
{ sideInset = 0.0; } 
[myScrollView setContentInset:UIEdgeInsetsMake(topInset, sideInset, -topInset, -sideInset)];
ApplicationDelegate *appDelegate = (ApplicationDelegate *)[[UIApplication sharedApplication] delegate];

CGFloat scrollViewHeight; //Used later to calculate the height of the scrollView
if (appDelegate.navigationController.navigationBar.hidden == YES) //If the NavBar is Hidden, set scrollViewHeight to 480
{ scrollViewHeight = 480; }
if (appDelegate.navigationController.navigationBar.hidden == NO) //If the NavBar not Hidden, set scrollViewHeight to 360
{ scrollViewHeight = 368; }

imageView.frame = CGRectMake(0, 0, CGImageGetWidth(yourImage)* [myScrollView zoomScale], CGImageGetHeight(yourImage)* [myScrollView zoomScale]);

[imageView setContentMode:UIViewContentModeCenter];

Also, I do the following to prevent the image from sticking a the side after zooming out.

- (void) scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale {
myScrollView.frame = CGRectMake(0, 0, 320, 420);
 //put the correct parameters for your scroll view width and height above

Okay, I think I've found a pretty good solution to this problem. The trick is to constantly readjust the imageView's frame. I find this works much better than constantly adjusting the contentInsets or contentOffSets. I had to add a bit of extra code to accommodate both portrait and landscape images.

Here's the code:

- (void) scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale {

CGSize screenSize = [[self view] bounds].size;

if (myScrollView.zoomScale <= initialZoom +0.01) //This resolves a problem with the code not working correctly when zooming all the way out.
    imageView.frame = [[self view] bounds];
    [myScrollView setZoomScale:myScrollView.zoomScale +0.01];

if (myScrollView.zoomScale > initialZoom)
    if (CGImageGetWidth(temporaryImage.CGImage) > CGImageGetHeight(temporaryImage.CGImage)) //If the image is wider than tall, do the following...
        if (screenSize.height >= CGImageGetHeight(temporaryImage.CGImage) * [myScrollView zoomScale]) //If the height of the screen is greater than the zoomed height of the image do the following...
            imageView.frame = CGRectMake(0, 0, 320*(myScrollView.zoomScale), 368);
        if (screenSize.height < CGImageGetHeight(temporaryImage.CGImage) * [myScrollView zoomScale]) //If the height of the screen is less than the zoomed height of the image do the following...
            imageView.frame = CGRectMake(0, 0, 320*(myScrollView.zoomScale), CGImageGetHeight(temporaryImage.CGImage) * [myScrollView zoomScale]);
    if (CGImageGetWidth(temporaryImage.CGImage) < CGImageGetHeight(temporaryImage.CGImage)) //If the image is taller than wide, do the following...
        CGFloat portraitHeight;
        if (CGImageGetHeight(temporaryImage.CGImage) * [myScrollView zoomScale] < 368)
        { portraitHeight = 368;}
        else {portraitHeight = CGImageGetHeight(temporaryImage.CGImage) * [myScrollView zoomScale];}

        if (screenSize.width >= CGImageGetWidth(temporaryImage.CGImage) * [myScrollView zoomScale]) //If the width of the screen is greater than the zoomed width of the image do the following...
            imageView.frame = CGRectMake(0, 0, 320, portraitHeight);
        if (screenSize.width < CGImageGetWidth (temporaryImage.CGImage) * [myScrollView zoomScale]) //If the width of the screen is less than the zoomed width of the image do the following...
            imageView.frame = CGRectMake(0, 0, CGImageGetWidth(temporaryImage.CGImage) * [myScrollView zoomScale], portraitHeight);
    [myScrollView setZoomScale:myScrollView.zoomScale -0.01];

Just disable the pagination, so it'll work fine:

scrollview.pagingEnabled = NO;

I had the exact same problem. Here is how I solved

This code should get called as the result of scrollView:DidScroll:

CGFloat imageHeight = self.imageView.frame.size.width * self.imageView.image.size.height / self.imageView.image.size.width;
BOOL imageSmallerThanContent = (imageHeight < self.scrollview.frame.size.height) ? YES : NO;
CGFloat topOffset = (self.imageView.frame.size.height - imageHeight) / 2;

// If image is not large enough setup content offset in a way that image is centered and not vertically scrollable
if (imageSmallerThanContent) {
     topOffset = topOffset - ((self.scrollview.frame.size.height - imageHeight)/2);

self.scrollview.contentInset = UIEdgeInsetsMake(topOffset * -1, 0, topOffset * -1, 0);

Although the question is a bit old yet the problem still exists. I solved it in Xcode 7 by making the vertical space constraint of the uppermost item (in this case the topLabel) to the superViews (the scrollView) top an IBOutlet and then recalculating its constant every time the content changes depending on the height of the scrollView's subviews (topLabel and bottomLabel).

class MyViewController: UIViewController {

    @IBOutlet weak var scrollView: UIScrollView!
    @IBOutlet weak var topLabel: UILabel!
    @IBOutlet weak var bottomLabel: UILabel!
    @IBOutlet weak var toTopConstraint: NSLayoutConstraint!

    override func viewDidLayoutSubviews() {
        let heightOfScrollViewContents = (topLabel.frame.origin.y + topLabel.frame.size.height - bottomLabel.frame.origin.y)
        // In my case abs() delivers the perfect result, but you could also check if the heightOfScrollViewContents is greater than 0.
        toTopConstraint.constant = abs((scrollView.frame.height - heightOfScrollViewContents) / 2)

    func refreshContents() {
        // Set the label's text …


Need Your Help

Coffeescript closures and arrays of random numbers

javascript coffeescript functional-programming closures

Running the following coffeescript consistently results in an array of all false.

css not working after writing .htaccess

php css apache .htaccess mod-rewrite

I was trying to get rid of my file extensions using .htaccess, it worked, but right now my CSS and images has stopped working. I have tried different things, but it's still not working. Please! I n...